Contact Advantech Search Shopping list
  1.  
  2. 0800-777-111
  3. 會員登入
首頁 運動控制與機器視覺

運動控制與機器視覺

研華運動控制解決方案,提供完整的應用解決方案。產品線涵蓋:運動控制卡、搭載工業等級的中央處理器的運動控制器、編碼器輸入與隔離輸出/輸入卡,以及各式工業電腦,滿足在印刷電路板、半導體、LCD面板、觸控面板等電子式機台自動化的應用需求。研華全系列運動控制卡提供2軸、4軸、6軸、8軸的多項產品,從簡易點對點控制、經濟型系列,到全功能之運動控制卡系列,並支持Windows 32位元/64位元之作業系統,提供Common motion API。除運動控制卡外,研華還提供完整的AMONet(Advantech Motion Network)分散式運動控制模組與輸出/輸入模組系列。
Results per page 9 18 | Sort by Price Highest / Lowest
Page 1 of 3
PCI-1245-AE NEW
CIRCUIT BOARD, Standard 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode; Pulse output up to 5 Mpps
  2. Memory buffer (10K points) for trajectory planning which is designed in DSP; Supports E-Gear, and helical interpolation
  3. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP; Hardware emergency input
  4. Watchdog timer
  5. Position latch via ORG & index signal; Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP

NT$22,882

規格比較 More
PCI-1265-AE NEW
Standard 6-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP

NT$31,339

規格比較 More
PCI-1285-AE NEW
8-Axis DSP-Based SoftMotion Controller PCI Card
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation, E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  5. Watchdog timer, Position latch
  6. Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP
  7. Supports gantry mode by semi-closed loop pulse train control
  8. RDY/LTC-dedicated input channels & SVON/CMP/CAM-DO/ERC-dedicated output channels are switchable for general input and output purposes

NT$35,413

規格比較 More
AMAX-1220-AE NEW
Open Frame 2-Axis Motion Module
  1. End limit logic is switchable (high or low active)
  2. Board ID is switchable.
  3. Easily visible LED indicators on board to do diagnosis.
  4. Direct wire to servo drive to save terminal board space while installation.
  5. Max. 5MHz, 2-axis pulse output
  6. 28 bits counter for incremental encoder
  7. Horizontal installation for for servo or stepping motor driver
  8. Suitable for DIN-rail mounting

NT$13,530

規格比較 More
AMAX-1240-AE NEW
Open Frame 4-Axis Motion Module
  1. End limit logic is switchable (high or low active)
  2. Board ID is switchable
  3. Easily visible LED indicators on board to do diagnosis
  4. Direct wire to servo drive to save terminal board space while installation
  5. Max. 6.5 MHz, 4-axis pulse output
  6. 28 bits counter for incremental encoder
  7. Horizontal installation for for servo or stepping motor driver
  8. Suitable for DIN-rail mounting

NT$20,892

規格比較 More
AMAX-1752-AE NEW
Open Frame 32-ch Isolated DI Module
  1. Communication baud rate, 2.5Mbps, 5Mbps, 10Mbps and 20Mbps are supported and switchable.
  2. Onboard screw terminal for direct wiring
  3. 2,500 VRMS Isolation voltage
  4. Suitable for DIN-rail mounting
  5. Board ID is switchable.
  6. Easily visible LED indicators on board to do diagnosis.

NT$6,566

規格比較 More
AMAX-1754-AE NEW
Open Frame 32-ch Isolated DO Module
  1. Communication baud rate, 2.5Mbps, 5Mbps, 10Mbps and 20Mbps are supported and switchable.
  2. Onboard screw terminal for direct wiring
  3. 2,500 VRMS Isolation voltage
  4. Suitable for DIN-rail mounting
  5. Board ID is switchable.
  6. Easily visible LED indicators on board to do diagnosis.

NT$6,721

規格比較 More
AMAX-1756-AE NEW
Open Frame 16-ch Isolated DI/16-ch DO Module
  1. Communication baud rate, 2.5Mbps, 5Mbps, 10Mbps and 20Mbps are supported and switchable.
  2. Onboard screw terminal for direct wiring
  3. 2,500 VRMS Isolation voltage
  4. Suitable for DIN-rail mounting
  5. Board ID is switchable.
  6. Easily visible LED indicators on board to do diagnosis.

NT$6,566

規格比較 More
MAS-3245-LG10001T
COMPUTER SYSTEM, MAS Controller(MVP-3245-MAS+MASC)
  1. Motion Studio: Rapid application development tool
  2. Programmable with BASIC language
  3. 4-axis embedded motion controller with 32-ch digital I/O
  4. RS-232, RS-485, and TCP/IP support
  5. Quick configuration user interface
  6. Programmable encryption to protect intellectual property
  7. Built-in quick programming assistant
  8. C-integration: External DLL interface

NT$49,870

規格比較 More
Page 1 of 3
x
Contact Advantech

0800-777-111

9:00-17:30

Contact Advantech